Section 1: IntroductionTable 1: Material Considerations in Platinum Anode Design

n reviewing the properties of these materials (Table 1), it becomes quite clear that if a combination of these materials was developed which exploits only the advantages, the result would be a superior anode material. The most logical combination of materials would include the use of a platinum outer layer, very thin due to cost, a layer of niobium beneath the platinum to allow for a dimensionally stable anode, and a copper core for both conductivity and economy. The niobium layer should be heavy enough to withstand normal mechanical handling.

To properly manufacture an anode material which is composed of multilayers, sophisticated metallurgical processing techniques must be employed to insure integral contact between the metal layers. The ideal method of insuring this contact is by providing a metallurgical bond. All of Anomet's clad materials are manufactured through very tightly controlled metallurgical coprocessing techniques yielding complete metallurgical bonds. In obtaining this type of high integrity bonding, three materials then behave as one with no possibility of spalling or non-bonds. This method of fabrication used by Anomet insures that the corrosion engineer obtains a high quality anode material.